Classification and installation method of road boom barrier gates
I. classification of boom barrier gates
According to the performance of the control part, it can be divided into mechanical and electrical boom barrier gate, digital boom barrier gate and intelligent boom barrier gate. The intelligent boom barrier gate has led display and voice broadcast functions.
According to the boom barrier gate pole, it can be divided into fence boom barrier gate, straight arm boom barrier gate, curved boom barrier gate and industrial boom barrier gate.
According to the takeoff and landing speed, it can be divided into: expressway boom barrier gate, medium speed boom barrier gate and slow speed boom barrier gate.
According to the installation direction, it can be divided into: left direction boom barrier gate and right direction boom barrier gate.
Installation location: easy to be seen, boom barrier gate pole facing out (intersection), road boom barrier gate ground and road surface shall be in the same horizon, and concrete ground shall be used as the foundation of road boom barrier gate.
II. Boom barrier gate installation method
1. Take out the accessories in the box.
2. Place the boom barrier box at a certain position, open the door, mark the hole position of the box bottom plate with a marking pen or screwdriver, and move the box away.
3. Use impact drill to drill expansion screws at several outlets, with hole depth of 70-80mm, and put in expansion screws, adjust box level, verticality and tighten nuts.
