Body Temperature Measurement + Face Recognition Intelligent Panel Machine
Software language: English, Italian, Spain, Chinese (more languages are available with MOQ 100pcs and translation support)
1 Product introduction
1.1 Product description
The series products of 2 million pixel temperature measurement face recognition intelligent panel machine using LCD display screen, they are the AI intelligent door access control products with the combination of embeddingthe algorithm of in-dept learning face recognition, integrating the high-precision thermal imaging temperature measurement chip as well as ISP image processing and other technologies. The series productsare equipped with powerful functions such as face detection, mask detection, face recognition comparison, body temperature detection and living body judgment. They are able to accurately capture the person information (such as facial information, identity information, whether to wear a mask, etc.) which has passed through the camera's field of view, and the body surface temperature. It is able to effectively help the users to manage access authority and monitor body temperature status, which is helpful to prevent the epidemic. Users can manage access rights offline by loading the face library to the device, as well as matching with attendance software to achieve employee attendance management. The products can be widely applied in scenes such as community access, barrier gate and passage, office building and so on!
1.2 Product appearance
1.3 Definition of equipment interface
No. | Interface name | Interface description |
1 | Power interface | 12VDC |
2 | Network interface | RJ45 network interface |
3 | Relay interface | +: NO Normally open port -: COM Common end |
4 | Wiegand interface | 1：12VDC 2: Wiegand protocol data port D1 3: Wiegand protocol data port D0 4: Signal ground |
2 Equipment installation
2.1 Installation location
1. The camera shall be set in front of the channel to capture the face;
2. It is suggested that the height h is about 1.4~1.6 meters, and the top view angle of the camera is 0~5 degrees;
3. In order to ensure the effect of temperature detection, it is better to keep the equipment 0.4m away from the personnel collection point (with the range of 0.3~0.5m), and the face pixels are not less than 100 pixels;
2.2 Installation environment
1. Requirements for illumination: no backlight, no obvious reflection on the face, uniform light and no shadow. In addition, in order to ensure that the scene lighting is sufficient during face capturing, it is suggested that if the face in the lens image is not bright enough, lighting equipment should be added accordingly to supplement the light on the face of the personnel (generally up to 250-800 Lux).
2. Requirements for light and wind: it is recommended that the equipment be installed indoors to ensure that there is no wind or direct sunlight between the equipment and personnel, and to avoid the phenomenon of too low or too high temperature measurement caused by blowing heat and direct sunlight.
Hot Tags: body temperature measurement + face recognition intelligent panel machine, China body temperature measurement + face recognition intelligent panel machine factory, manufacturers, suppliers, 8 inch face recognition temperature measurement system, diagnostic medical thermometer instruments, facial recognition temperature detection, finger tip oximeter, fingertip co2 monitor, oxygen meter for your finger
