Non Contact Infrared Walk Through Temperature Fever Checking Detector

Non Contact Infrared Walk Through Temperature Fever Checking Detector

Product introduction:

The door detect temperature by infrared temperature sensor with high precision and high resolution. the sensing distance ≤ 0.5 meters, the temperature tolerance is ± 0.5 ℃ at room temperature The original setting temperature is 37.6 ℃ (can be adjusted). the actual detection temperature will be displayed when people pass, The alarm will sound When the temperature exceeds 37.6 ℃.No temperature displays without passing people

Product parameters:

Temperature detection tolerance: ± 0.5 ℃ (at room temperature)

Voltage: 220V ~ 250V

Power: 200W

Net weight: 50kg

Inner frame dimension: 2000mm (H) × 700mm (W) × 500mm (d)

Outer frame dimension: 2270mm (H) × 830mm (W) × 500mm (d)

Application:

Railway station, bus station, subway station, hospital, gymnasium, factory, office building, large-scale events and other public places.

Product characteristics:

(1) The machine is more accurate to two decimal places (generally other machines only display one decimal place)

(2) The sensor probe can be adjusted automatically based on height of passing people

(3)Fast and convenient installation, i.e. ready to use

Chapter II precautions

The purpose of the following safety precautions is to tell you how to operate the product safely and correctly. Please read them carefully and make sure you understand them before reading other parts of this introduction

1, This product is only suitable for indoor use, the environment temperature will affect detection results if outdoor use

2, Operation is not allowed in high temperature and humidity condition.

3, Only professionals are allowed to dismantle and adjust the parameters in the electrical control box.

4, To get accurate detection results ,This machine have to take 5 minutes as self-check before operation

5,To avoid passing people collision with the door, It shall be installed on the flat and vibration free ground

6,A warranty card has been put into package, free of charge during the warranty period.

7, There are expansion bolts at four corners, which must be fixed and driven into the ground.

(1) Static Detection:

The tested person stands at the door and keep stay. The body temperature will be shown in display screen

(2) Dynamic Detection

Displaying the detection temperature in real time when people pass