Products Description
Parking Ticket Dispenser
Product Overview
The Parking Ticket Dispenser is an automated ticket dispensing terminal for parking lot entrances. It supports barcode ticket printing and IC/ID card reading, and can be integrated with gate barriers, induction loops, and payment systems. Suitable for high-traffic commercial parking scenarios, its ticket dispensing speed and stability meet the needs of continuous operation.
Features
Ticketing and Media
Ticket Type: Thermal paper ticket, printing includes entry time, date, and barcode.
Ticketing Speed: High-speed ticketing design with anti-ticket jamming mechanism, adaptable to continuous traffic flow during peak hours.
Card and Identity Recognition
Card Type Support: IC card / ID card
Typical Scenarios: Monthly pass vehicles use card for entry, temporary vehicles use ticket for entry; the same terminal can handle both types of users.
System Integration
Communication Protocol: RS485 / TCP-IP
Linked Devices: Barrier gate, loop detector, payment terminal, parking guidance system
Offline Capability: Supports offline operation; data is synchronized after network recovery, avoiding entrance paralysis due to network outages.
Environmental Adaptability
Operating Temperature: -35°C to +65°C, covering outdoor deployment in extremely cold and high-temperature regions. Protective Design: Features lightning protection, overload protection, and anti-interference capabilities.
Applicable Scenarios
| Scenario Type | Recommendation Reasons |
|---|---|
| Large Office Building Parking Lot | Fast ticket issuance during peak hours, reducing entrance queues |
| Shopping Mall Parking Lot | High temporary vehicle traffic, large-capacity thermal paper rolls reduce maintenance frequency |
| Public Parking Lot | Supports mixed management of monthly passes/temporary vehicles, integrating barrier gates and payment systems |
| Unmanned Entrance | Offline operation + remote monitoring, reducing on-site manpower requirements |
FAQ
Q1: Can this ticket machine only issue tickets, or can it also accept card payments?
A: Both. The device has a built-in IC/ID card reader module. Temporary vehicles take tickets to enter, while monthly pass vehicles can directly swipe their cards for passage.
Q2: Does it need to be compatible with existing barrier gate systems?
A: Supports RS485 and TCP/IP protocols, compatible with most barrier gates, inductive loop detectors, and parking management software on the market. It is recommended to confirm the communication interface of your existing system before deployment.
Q3: Will it automatically remind you when the paper tickets are used up?
A: The device supports remote monitoring. With management software, it can monitor the remaining paper rolls and device status, facilitating timely replacement by maintenance personnel.
Q4: Can it be used outdoors in rainy weather?
A: The operating temperature range covers -35°C to +65°C and has lightning and overload protection. It is recommended to install it at a covered entrance/exit location to extend its service life.
Q5: If the ticket dispenser malfunctions, can the vehicle still enter?
A: The device supports offline operation. If the ticket dispensing module malfunctions, the administrator can switch to a backup mode (such as manual card issuance or license plate recognition for entry), depending on the on-site system configuration.
Q6: If the ticket dispenser malfunctions, can the vehicle still enter?
A: The device supports offline operation. If the ticket dispensing module malfunctions, the administrator can switch to a backup mode (such as manual card issuance or license plate recognition for entry), depending on the on-site system configuration.
Hot Tags: parking ticket dispenser, China parking ticket dispenser factory, manufacturers, suppliers, anpr car park, car park number plate recognition system, double decker parking system, parking boom barrier, parking lot payment systems, reverse parking assist system
